Lot

421

SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM

In Mechtron Innovations

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 905-669-8893 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/4
SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM - Image 1 of 4
SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM - Image 2 of 4
SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM - Image 3 of 4
SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM - Image 4 of 4
SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM - Image 1 of 4
SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM - Image 2 of 4
SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM - Image 3 of 4
SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM - Image 4 of 4
Auctioneer has chosen not to publish the price of this lot
Cambridge, Ontario
13.00%
18.00%

SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM

SCOTT MODEL 6551-10 IMPELLER TRANSFER UNIT, 160GPM, 3 X 2 X 10 SIZE, 1750 RPM

Mechtron Innovations

Ends from
Venue Address
200 Sheldon Drive
Cambridge
Ontario
N1R 7K1
Canada

EXCLUSIVE RIGGING APPLIES TO THIS AUCTION, SEE INFORMATION BELOW:

National Rigging & Transportation
100 Municipal Street
Welland, Ontario
Canada L3B 3P2
Attn: Darren Chapman
Office: 1-905-788-1110
Mobile: 1-905-704-9011
darren@nationalrigging.com

Rigging to Include: Electrical disconnect, dismantle and prep where applicable and loading onto provided flatbed trucks (Rigger can also quote transportation if requested). All prices are plus fees and taxes.  Contact rigger for pricing on loading into containers, dry vans,  palletizing lots, crating, wrapping, blocking, etc.

Important Information

Auction Date & Time: lots start closing on Wed. 05/22/2024 10:00 am

Location: 200 Sheldon Drive, Cambridge, ON, N1R 7K1

Inspection: Tuesday May 21st, 9AM - 4PM or By Appointment

18% Buyers Premium applies on all online purchases. 

 

Featuring:

Tube Benders, Formers, Shears
LANG 5-Axis Mandrel Type CNC Tube Bender, s/n WD4105

(2) LANG HY 80 CNC MR 5-Axis Mandrel Type CNC Tuber Benders, MMI Multicontrol 2020 CNC Control
EAGLE EATON LEONARD
VB075XP-RLH CNC Mandrel Type Tube Bender, Hydraulic Mandrel Extractor, Hydraulic Pressure Die Assist, s/n 224156EPT

PYRAMID TUBULAR TECHNOLOGIES INC. CNC Servo Hydraulic Mandrel Type Tube Bender, BendPro G2 Control w/ Tooling & Dies

HAVEN 873 Tube Re-Cut, RedLion Control, 3” Square Cap., s/n 5580 w/ 20’ Bundle Loader w/20′ Bundle Loader

HAVEN 872 Tube Re-Cut

VULCAN Brehm Tube Cutter, s/n VT1067-R
EAGLE / BURRMASTER (Buckeye) End Former & Ram, Model 15-98155, s/n 0107
EAGLE EEE Triple Head Vise & Ram Tube End Forming Machine, Mitsubishi Control, 3 x 10HP, s/n 3440
EAGLE I/O-I/O Double End Former, Maxi-Monitor Mark-III Control, 20HP, s/n 3090

EAGLE C2000 End Former

EAGLE E85 End Former

EAGLE CEF End Former

2017 MW MILLEMIGLIA DIE 70/1 R Tube End Former, Siemens Simatic HMI Control, s/n 217075

(4) ADDISON MCKEE FM-70 ID/OD Dual Tube End Formers, Allen Bradley PanelView Plus Control

(2) 2015/14 SOCO EF-AC/115-U Tube End Camfering Machines, 4HP

 

Deburring Machines

2018 RSA Turnamat Deburring Machine, 1,500 – 3,000 RPM, s/n RSA-14626-10

2017 RSA Turnamat Deburring Machine

2006 EWU Rotomat Deburring Machine, s/n 1537

ADIGE HP100 Deburring Machine
DUTCHSAWS DB-76 Deburring Machine, s/n 012081

 

CNC Vertical Machining Center

2013 HURCO VM20i CNC Vertical Machining Center, CNC Control, 20” x 46” Table, CAT40, (20) ATC, 20HP, s/n S20-1600263DAAAH w/ 4th Axis Rotary Attachment

 

Milling Machines & Lathes

LILIAN 5VU CNC Vertical Milling Machine, Fagor 3-Axis DRO, 10” x 50” Table, s/n 1271

(3) FIRST LC 1-1/2VS Vertical Milling Machines, Heidenhain DRO, Power Feed & Drawbar, 9” x 42” Table

LAGUN FVA-2000 Universal Milling Machine, 18” x 80” Table

FORTUNE 1660G-D Engine Lathe, Heidenhain DRO, 10” Chuck, 8” Swing, 48” Between Centers, Tool Post, s/n 582100

 

Saws

SOCO HVS-400FA-DR Hydraulic Cold Saw, Digital Controls, Auto Feed, Clamping

(2) SOCO VS-355FA-DR Hydraulic Cold Saws, Digital Controls, Auto Feed, Clamping
(3) KASTO Cold Saws

BEWO / DUTCHSAWS DCH70M Cold Saw

BEWO 315HT/RFA/PROG Automatic Cold Saw

 

Welding Cells & Equipment

2004 PANASONIC VR-006 Welding Robot, 6-Axis, 6kg Payload, Model PA102S Control Panel, s/n J0484, Panasonic Weld Source Model GX-R006, Code: YA1PCR61R02, Pendant Control, Performarc Dual Pallet Enclosure, Light Curtains

(4) Custom Welding Cells w/ LINCOLN ELECTRIC PowerMig 350MP Welders, s/n’s U1180502034 (MEC056) & U1170707667 (MEC057))
MAWER Rocker Type Spot Welder, 50KVA, Medar MedWelder 200S Control, s/n 3720.01 w/ Miller CoolMate 4 Cooling Unit

(3) PLYMOVENT Fume Extractors

Punch Presses

(3) STAMTEC OCP-60 Punch Presses, 60-Ton Cap., 3.55” Stroke, 15.8” x 35.5” Bed, 80-165 Strokes/min, Wintress Autoset 1500 Plus Wireless Load Analyzer & Loading System

(3) STAMTEC OCP-45 Gap Frame Punch Presses, OmniLink 805 Controller, Safety Guarding

KOMATSU OBP80 Punch Press, 80-Ton Cap.

KOMATSU H1F45 Servo Punch Press, 45-Ton Cap.

BLOW HNCP-60 OBI Punch Press, 60-Ton Cap., 3.94” Stroke, 19.68” x 33.07” Bed, 80-120 Strokes/min

BLOW GC60 Double Crank Gap Punch Press

(2) FEDERAL Model 5 OBI Punch Presses, 45-Ton Cap., 450mm x 800mm Bed, 30-60 Strokes/min, 80mm Adjust, s/n’s 5-2434, N/A

BROWN BOGGS 1148-C Double Crank Gap Punch Press, 100-Ton Cap., 30” x 44.5” Ram, 30” x 72” Bed, s/n 6726

BROWN BOGGS 18LJA OBI Punch Press, 80-Ton Cap., 6” Stroke, 12.5” x 16.25” Shut Height, 18” x 24” Ram, 25.5” x 36” Bed, 42 Strokes/min
(3) BROWN BOGGS OBI Punch Presses, 60-Ton Cap.
SEI MARK-28-W OBI Punch Press, 28-Ton Cap., 3.1” Stroke, 9.11” Shut Height, 12.6” x 27.6” Bed, 70-110 Strokes/min, Allen Bradley PanelView Plus 400 Control

STANKO KD2126K OBI Punch Press, s/n 106

Rolling Stock

HYUNDAI HLF25-5 Propane Forklift, 4,000lb Cap., 3-Stage Mast, Side Shift, s/n FU0210180

(2) CATERPILLAR 2ET3000 Electric Forklifts, 3,000lb Cap., 3-Stage Mast, Side-Shit, 3-Wheel, 48V

MITSUBISHI TX40M Electric Forklift, s/n AUB2650452

 

Stainless Steel Tube Inventory (215+ TONS)

(400+) Bundles of 409/439/441 Stainless Steel Tube, 192” x 2.75”/2.5”/2.36” OD

Plant Support Equipment

YOUIL YGS-52A Surface Grinder, Heidenhain DRO, 550mm x 200mm Working Surface, 2HP, s/n 5291208

FEMCO / WANTONG RD-12A Radial Arm Drill, s/n 75-2137

4-Cylinder Piece Machine w/ 20HP Hydraulic Power Pack

MULTICYCL 8809 Pneumatic Dimple Press

ULTRASONIC UP4822 Power Washer, s/n 1113311

(2) 2015 YAKASAWA MOTOMAN MH24T/YR-MH00024-A00 Robots, 24kg Cap., DX200 Controller

MITUTOYO BH710 CMM, Renishaw Probe, 48” x 64” Table, s/n N93070015008108108

ATLAS COPCO 100HP Air Compressor

PARKER DOMINICK HUNTER Air Dryer

(11+) PENTALIFT Hydraulic Lift Tables, 4,000lb Cap., 50” x 50”

=================================================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Friday, 8:00 AM EST – 8:00 PM EST

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

 

Terms and Conditions

PAYMENT:    All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).

Payment is due by:  2PM Thursday May 22nd, 2024.

Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00 

Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.


Removal deadline:   2PM Friday June 7th, 2024.

 

EXCLUSIVE RIGGING APPLIES TO THIS AUCTION, SEE INFORMATION BELOW:

National Rigging & Transportation
100 Municipal Street
Welland, Ontario
Canada L3B 3P2
Attn: Darren Chapman
Office: 1-905-788-1110
Mobile: 1-905-704-9011
darren@nationalrigging.com

Rigging to Include: Electrical disconnect, dismantle and prep where applicable and loading onto provided flatbed trucks (Rigger can also quote transportation if requested). All prices are plus fees and taxes.  Contact rigger for pricing on loading into containers, dry vans,  palletizing lots, crating, wrapping, blocking, etc.

 

Accounting: Franca 905-669-8893 Ext. 226, fguida@infinityassets.com

Banking Information (Wire Transfers):

CANADIAN WIRE TRANSFER INSTRUCTIONS

Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO

Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137

TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2

FOR CUSTOMERS FROM USA:

INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192

 

Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.

 

EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS 

The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale: 

  1. All invoices must be paid in full prior to removal of equipment/ Each invoice must be marked “Paid in Full” and initialed by an authorized Infinity representative.
  2. All buyers are solely responsible for coordinating the removal of items purchased at the Auction and all associated costs.
  3. Buyers are responsible for, at their expense: a. Proper and safe disconnection and termination of all electrical, gas, water and/or air lines to machines conforming to all governing building codes; b. Shearing flush to the floor of all anchor bolts or fasteners; c. Erecting safety barriers around pits and holes in the floor created by removal of equipment until repaired; d. Repair all holes in the floor, walls or roof created by the removal of items purchased conforming to all governing building codes; e. Removing, off premises, machine oils and all hazardous materials (including all contaminants) contained in items purchased; f. Repairing all damage cased to the premises by a buyer, its representative or any other party hired by a buyer for the removal of items purchased; g. Leaving the work area in a clean, broom-swept condition conforming to all governing building codes; h. Any other specific terms and conditions communicated by Infinity before, during or after the auction sale; i. Removal of items purchased by the time and date set by Infinity before, during or after the auction sale; and j. The safety of all of a buyer’s employees, agents or representatives including all movers/riggers hired by such buyer.
  4. Prior to removal, all buyers, or any movers or riggers hired by a buyer, must provide to Infinity a satisfactory certificate of insurance evidencing at leas $5,000,000 in comprehensive liability insurance coverage (including workers compensation and automobile) per person, per occurrence.
  5. Prior to removal, an authorized Infinity representative must examine and approve the removal of all items purchased at the sale. Such approval shall be indicated by this representative initialing all invoices.
  6. No items shall be removed until after the auction sale. Removal hours are weekdays only between 8:00 a.m. and 4:00 p.m. unless otherwise specified.
  7. Buyers and their movers/riggers are jointly and severally liable for all damages, costs and expenses to the premises or any other assets which were cased by any of them, their employees, agents or representatives whether through negligence or otherwise. The Buyer indemnifies and saves Infinity harmless from any and all costs, expenses and claims suffered or incurred by Infinity as a result of any act or omission of such buyer and/or any mover or rigger retained by a buyer. 

NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION. 

NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.

 

See Full Terms And Conditions

Tags: Material Handling